Specifications
3
Specifications
R22 MODELS
(COOLING ONLY)
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94.
3) NOMINAL COOLING CAPACITY IS BASED ON THE CONDITIONS BELOW :
– 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR.
MODEL INDOOR UNIT MWM007F MWM010F MWM015F MWM020F MWM025F
OUTDOOR UNIT MLC007B MLC010B MLC015B MLC020B MLC025B
NOMINAL kcal/h 1940 2444 3200 4788 6048
COOLING W
2257 2843 3721 5569 7034
CAPACITY Btu/h 7700 9700 12700 19000 24000
50 Hz 803 887 1365 2215 [2136] 2772 [2715]
60 Hz - 820 1210 1910 2420 <2719 Recip.>
50 Hz 3.4 3.9 6.2 10.7 [4.0] 13.0 [5.1]
60 Hz
- 3.8 5.4 8.4 10.7 <12.6 Recip.>
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW cfm / L/s 300 / 142 300 / 142 300 / 142 480 / 227 580 / 274
50 Hz 4 POLES x 10W 4 POLES X 10W 4 POLES X 12W 4 POLES X 20W 4 POLES X 25W
60 Hz - 4 POLES X 10W 4 POLES X 12W 4 POLES X 20W 4 POLES X 25W
50 Hz 25 25 26 53 57
60 Hz - 24 27 71 82
50 Hz
0.11 0.11 0.11 0.23 0.24
60 Hz - 0.11 0.12 0.31 0.36
FAN MOTOR PROTECTION
MATERIAL
TUBE PATTERN
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
m
2
/ft
2
HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL - H / M / L dBA 38 / 32 / 29 38 / 34 / 30 38 / 35 / 31 45 / 42 / 39 47 / 44 / 42
ROOM TEMPERATURE
AIR DISCHARGE
OPERATION
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
875 / 34.4 1130 / 44.5
269 / 10.6 268 / 10.6
16 / 0.63 20 / 0.79
SARANET+IONIZER+DEODORIZER
371 / 14.6 382 / 15.0
CONTROL
THERMOSTAT ELECTRONIC CONTROL
LOUVER (UP & DOWN) & GRILLE (LEFT & RIGHT)
LCD REMOTE CONTROL
179 / 7.0 202 / 8.0
9.5 16
290 / 11.4 306 / 12.0
815 / 32.1 1062 / 41.8
2
18
0.198 / 2.131 0.254 / 2.733
THERMAL OVERLOAD RELAY
COIL
TUBE
SEAMLESS COPPER TUBE
INNER GROOVED
7.0 / 0.276
0.32 / 0.013
FIN
ALUMINIUM (HYDROPHILIC SLIT FIN TYPE)
0.11 / 0.0043
INPUT POWER (W) - 1∅ [3∅]
RUNNING CURRENT (A) - 1∅ [3∅]
INDOOR UNIT
220-240/1/50, 208-230/1/60
R22 / OUTDOOR CAPILLARY TUBE
FAN
ANTI FUNGUS CROSS FLOW FAN
FAN MOTOR
RATED INPUT POWER (W)
RATED RUNNING CURRENT (A)
POWER SOURCE
COMPRESSOR TYPE V/Ph/Hz
50 Hz 20 30 30 45 [ NIL ] 45 [ NIL ]
60 Hz - 30 30 45 60 <35>
RATED RUNNING CURRENT (A) 50 Hz 3.1 3.6 5.8 9.9 [3.7] 12.2 [4.8]
60 Hz - 3.4 5.0 7.4 9.6 <11.5>
50 Hz 728 812 1277 2029 [1950] 2582 [2525]
60 Hz
727 1111 1672 2171 <2470>
LOCKED ROTOR AMP. 50 Hz 15 20 25 56 [21.4] 57 [24.9]
- 1∅ [3∅]
60 Hz - 26 33 49 67 <70>
PROTECTION DEVICE - 1∅ [3∅]
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
50 Hz 0.21 0.21 0.28 0.56 0.56
60 Hz - 0.32 0.32 0.73 0.73
50 Hz
20 20 25 55 55
60 Hz
- 20 25 80 80
50 Hz 50 50 62 133 133
60 Hz - 69 72 167 167
MATERIAL
TUBE PATTERN PLAIN PLAIN INNER GROOVED
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW 1 1 1 2 2
FIN PER INCH 16 18 19 14 14
FACE AREA
m
2
/ft
2
0.25 / 2.66 0.32 / 3.50 0.32 / 3.50 0.51 / 5.53 0.51 / 5.53
HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
WEIGHT kg 27.5 31 34 57 58
MATERIAL
CASING THICKNESS mm/in
FINISHING
SOUND PRESSURE LEVEL
dBA
47 48 49 52 53
TYPE
LIQUID mm/in
6.35 / 1/4 6.35 / 1/4 9.52 / 3/8
GAS mm/in 12.70 / 1/2 15.88 / 5/8 15.88 / 5/8
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
REFRIGERANT CHARGE kg 0.58 0.74 0.85 1.68 1.53
OUTDOOR UNIT
220-240/1/50, 208-230/1/60 (380-415/3/50)
COMPRESSOR
ROTARY HERMETIC < RECIPROCATING >
CAPACITOR (µF) - 1∅ [3∅]
- 1
∅
[3
∅]
RATED INPUT POWER (W) - 1Ø [3Ø]
FAN
PROPELLER / DIRECT
GLASS REINFORCED ACRYL STYRENE RESIN
355.0 / 14 406 / 16
RATED RUNNING CURRENT (A)
MOTOR OUTPUT (W)
RATED INPUT POWER (W)
COIL
TUBEFIN
SEAMLESS COPPER TUBE
INNER GROOVED
9.52 / 3/8
0.35 / 0.014
ALUMINIUM (CORRUGATED FIN TYPE)
0.127 / 0.005
494 / 19.4 646 / 25.4
740 / 29.1 840 / 33.1
270 / 10.6 330 / 13.0
POLYESTER POWDER
PIPE
FLARE VALVE
SIZE
6.35 / 1/4
9.52 / 3/8
EXTERNAL OVERLOAD PROTECTOR
INTERNAL OVERLOAD PROTECTOR [INTERNAL
THERMOSTAT + EXTERNAL PHASE PROTECTOR]
401 / 15.8 461 / 18.1
558 / 22.0 710 / 28.0
851 / 33.5 957 / 37.7
GALVANISED MILD STEEL
0.8 / 0.031