Specifications
7
R22 MODELS
(HEATPUMP)
Abbreviation
INT. O.L.P - INTERNAL OVERLOAD PROTECTOR
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94.
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
MODEL INDOOR UNIT
OUTDOOR UNIT MLC030BR MLC030CR
NOMINAL kcal/h 6550 7560
COOLING W
7620 8790
CAPACITY Btu/h 26000 30000
NOMINAL kcal/h 7056 7560
HEATING W 8206 8790
CAPACITY Btu/h 28000 30000
INPUT POWER (COOLING) - 1∅ [3∅]
W (50/60Hz)
2992 / - 2944 [ 3204 ] / 3525
INPUT POWER (HEATING) - 1∅ [3∅]
W (50/60Hz) 2831 / - 2864 [ 3060 ] / 3223
RUNNING CURRENT(COOLING) - 1∅ [3∅]
A (50/60Hz) 14.3 / - 14.3 [ 5.4 ] / 14.0
RUNNING CURRENT (HEATING) - 1∅ [3∅]
A (50/60Hz) 13.9 / - 13.7 [ 5.3 ] / 15.3
POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 220 - 240 / 1 / 50/ 60
REFRIGERANT / CONTROL
R22 / OUTDOOR CAP TUBE R22 / OUTDOOR CAP TUBE + TXV
FAN TYPE
AIR FLOW cfm / L/s
FAN MOTOR
RATED INPUT POWER W (50/60Hz)
RATED RUNNING CURRENT A (50/60Hz)
FAN MOTOR PROTECTION
MATERIAL
TUBE PATTERN
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
m
2
/ft
2
HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL - H / M / L dBA
ROOM TEMPERATURE
AIR DISCHARGE
OPERATION
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
DEPTH mm/in
MWM030FR
INDOOR UNIT
FAN
ANTI FUNGUS CROSS FLOW FAN
740 / 349
4 POLES X 45W
71 / 82
0.30 / 0.38
THERMAL OVERLOAD RELAY
COIL
TUBE
SEAMLESS COPPER TUBE
INNER GROOVED
9.52 / 0.375
0.35 / 0.013
FIN
ALUMINIUM (HYDROPHILIC SLIT FIN TYPE)
0.11 / 0.0043
2
16
0.291 / 3.130
360 / 14.2
1200 / 47.2
200 / 7.9
17
49 / 47 / 45
CONTROL
THERMOSTAT ELECTRONIC CONTROL
AUTO LOUVER (UP & DOWN) & GRILLE (LEFT & RIGHT)
LCD REMOTE CONTROL
20 / 0.79
SARANET+IONIZER+DEODORIZER
420 / 16.5
1267 / 49.9
260 / 10.2
COMPRESSOR TYPE ROTARY HERMETIC RECIPROCATING HERMETIC
V/Ph/Hz 220 - 240 / 1 / 50 220 - 240 / 1 / 50 / [ 380 - 415 / 3 / 50 ]
V/Ph/Hz - 208 - 230 / 1 / 60
CAPACITOR - µF
50 Hz
50 45 [ NIL ]
1∅ [3∅]
60 Hz - 45
LOCKED ROTOR AMP. - A 50 Hz 66 85 [ 35 ]
1∅ [3∅]
60 Hz - 88
RATED RUNNING CURRENT (COOLING) - A 50 Hz 13.4 13.0 [ 5.0 ]
1∅ [3∅]
60 Hz
- 12.4
RATED RUNNING CURRENT (HEATING) - A 50 Hz 13.0 12.4 [ 4.9 ]
1∅ [3∅]
60 Hz - 13.7
INPUT POWER (COOLING) - W 50 Hz 2781 2640 [ 2900 ]
1∅ [3∅]
60 Hz - 3182
INPUT POWER (HEATING) - W 50 Hz
2620 2560 [ 2756 ]
1∅ [3∅]
60 Hz - 2880
PROTECTION DEVICE INT. O.L.P INT. O.L.P + HI-LO PRESS. SWITCH
POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 220 - 240 / 1 / 50 , 208 - 230 / 1 / 60
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in 406 / 16 610 / 24
RATED RUNNING CURRENT A (50/60Hz) 0.6 / - 1.03 / 1.25
MOTOR OUTPUT W (50/60Hz) 80 / - 145 / 145
RATED INPUT POWER W (50/60Hz) 140 / - 233 / 261
MATERIAL
TUBE PATTERN INNER GROOVED PLAIN
DIAMETER mm/in
THICKNESS mm/in 0.36 / 0.014 AVE. 0.35 / 0.014
MATERIAL ALUMINIUM (SLIT FIN TYPE) ALUMINIUM (CORRUGATED FIN TYPE)
THICKNESS mm/in
ROW 2 2
FIN PER INCH 16 16
FACE AREA
m
2
/ft
2
0.51 / 5.53 0.87 / 9.33
HEIGHT mm/in 646 / 25.40 850 / 33.46
DIMENSION WIDTH mm/in
840 / 33.10 1030 / 40.55
DEPTH mm/in 330 / 13.00 400 / 15.75
WEIGHT kg 58 95
MATERIAL
CASING THICKNESS mm/in
FINISHING
SOUND PRESSURE LEVEL dBA 56 58
TYPE
LIQUID mm/in
GAS mm/in
PACKING HEIGHT mm/in
710 / 27.95 1000 / 39.37
DIMENSION WIDTH mm/in 957 / 37.68 1200 / 47.24
DEPTH mm/in 461 / 18.15 560 / 22.05
REFRIGERANT CHARGE kg 1.78 2.30
0.8 / 0.031
POLYESTER POWDER
PIPE
FLARE VALVE
SIZE
9.52 / 3/8
15.88 / 5/8
9.52 / 3/8
FIN
0.127 / 0.005
GALVANISED MILD STEEL
OUTDOOR UNIT
COMPRESSOR
POWER SOURCE
FAN
PROPELLER / DIRECT
GLASS REINFORCED ACRYL STYRENE RESIN
COIL
TUBE
SEAMLESS COPPER TUBE