Use and Care Manual

Español
English
www.themdsports.com
1639630
4
(Continúe en la siguiente página.)
(Continued on the next page.)
Adjustable "L"
Bracket
Corchete “L”
Regulable
1/4" Barrel Nut
Tuerca
de Barril 1/4"
5/16" Barrel Nut
Tuerca
de Barril 5/16"
P1 P2
x2
x32
x32
P3
Logo Plate
P4
x1
Placa de logotipo
1639630 PRE-INSTALLED PARTS / PIEZAS PREINSTALADAS
1. Find a clean, level place to begin the assembly of your
Billiard Table. The table will be assembled upside down
and then turned over on its legs once the assembly is
completed. This game table is heavy, and turning it over
will require at least four strong adults.
2. Remove all of the parts from the box and verify that you
have all of the listed parts as shown on the parts list
pages. Carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your
work surface.
1. Encuentre un lugar limpio, plano para comenzar el montaje
de su Mesa de Billar. La mesa será montada al revés y
luego voltee sobre sus patas una vez completado el
montaje. Esta mesa de juego es pesada y requerirá
por lo menos cuatro adultos fuertes para el volteo.
2. Quite todas las partes desde la caja y verifique que están
todas las partes catalogadas como mostrado en la página
de lista de partes. Con cuidado el corte o el rasgón de
las cuatro rincones de la caja de modo que el inferior
de la caja pueda ser usado como su superficie de trabajo.
INSTRUCCIONES DE ENSAMBLAJE
ASSEMBLY INSTRUCTIONS: