GC330 Instruction Manual
GC330 Instruction Manual POWER LED 1 2 3 4 UL2464 16AWGx4C 1000±50mm Standard male plug(power supply side): AMP 1-480702-0 equivalent PIN NO. OUTPUT 1,2 +V 3,4 -V Female plug(customer side, not provide with the power supply): AMP 1-480703-0 equivalent WARNING : Please make sure the polarity of the battery is connected correctly! Assembly Procedure : 1.Make sure the charger is shut off and cho osing suitable wire s to connect the ch arger and ba tteries based on the rati ng of charging current.
Statu s Under General Opera tion: At the begin ning s tage of operation, the charger provides the largest current with 40.8V dc of output voltag e (for 36V batterie s) to charg e batt eries. The LED indicator will lighten in red. After a period of time (probably a coup le of hours, based on the capac ity of batte ries), the cha rging curren t will d ecrease gradually. After reaching 0.3A±0.1A of its maximum value, the charger will go into "floating-charge" stage. The LED ind icator will turn to green.
IMPORTANT SAF ETY INSTRUCTIONS - SAVE T HESE INSTRUCTIONS DANGER - TO REDUCE THE R ISK OF FIRE OR ELECT RIC SHOCK. CAREFULLY FOLLOW THESE INSTRUCTIONS. 1.Thi s manual contains important sa fety and operating instructions for battery c harger Models GC2 20A12,GC2 20A24 and GC220A48. 2. SAVE THESE IN STRUCTIONS - This ma nual contains important safety a nd op erating Instructions for battery charge r Models GC330A36 and GC330A48. 3.