Manual

Page%12%of%22% Oct‐12%
K 7 -*+,1&()/6-IA5.2-)/&Q#)& C7JR &
!
The!STAGE8.8!ships!with!the!8!analog!inputs!linked!to!CobraNet®!Transmitter!sub!
channels!1‐8!and!CobraNet®!Receiver!sub!channels!33‐40!are!linked!to!the!8!analog!
outputs.!This!allows!the!STAGE8.8!to!be!used!‘out!of!the!box’!by!merely!setting!up!
Transmitter!and!Receiver!(‘Bundle’)!network!addresses.!
!
However,!the!STAGE8.8!has!the!capability!of!transmitting!16!CobraNet®!channels!and!
receiving!16!CobraNet®!channels,!so!a!more!sophisticated!routing!can!be!configured!
using!the!free!utility!Cobranet!Discovery!(CNDISCO)!from!Cirrus!Logic.!
K8? (#C47(S&T&712A+&
!
To!use!CNDISCO,!the!host!PC!or!laptop!must!be!set!to!the!default!IP!subnet!in!order!to!
talk!to!the!STAGE8.8.!Figure 4-1!below!shows!the!method!of!setting!up!a!Windows!
computer.!NOTE:!The!default!IP!address!of!the!STAGE8.8!IS!192.168.192.50.!
!
!
Figure 4-1: *HIIJKL!MN!IOH!&1!PQ QRHSS!PKQ!SMTKHI!UPSV6!
• Go!to!Control!Panel!and!then!open!“Network!connections”.!
• Click!on!the!General!tab!and!open!“Properties”.!
• Select!“Internet!Protocol!(TCP/IP)”!and!click!on!properties.!