User Manual

Power on off
Adjustable: 1H-2H-3H-4H-5H-6H-7H-8H
Fan Speed: “Low---Mid---High---Auto”
Filter replacement reminder and reset
Sleeping Mode
L M H AUTO
CONTROL PANEL OVERVIEW
1. Control panel
INSTRUCTIONS
Before you turn on the Mini Air Purifier for the first time, be sure to remove the filter bag.
1. Filter Installation
Grasp the body of the Mini Air Purifier and turn it counterclockwise to open (the position
shown by the picture). Once open replace the filter and turn it in the direction of the lock
to close.
2. Air Quality Indicator
Air Quality Good Lightly Polluted Heavily Polluted
Fan Speed Low Mid High
PM2.5 0,50 51-149 <150
3. The Sleeping mode
When all other icons are off, and the purifier selects the low fan speed.
4. Filter Replacement Reminder
Change filter after 10-12 months of use.
2. Standby
Insert the plug of the Mini Air Purifier into the power source, you will hear a short ring
and the “power button” indicator will light up.
3. Power on/off
Tap the top power icon to switch the power on and off. The default fan speed is set to
Low mode.
4. PM2.5 Display
The air quality sensor automatically senses after power is on. Wait three minutes for the
sensor to stabilize. (Note: The value indicated in this function is for reference only and
cannot be used to replace professional testing equipment)
5. Fan Speed button
Tap the fan speed button to adjust the fan speed levels between: “Low” → “Mid” →
“High” → “AUTO”.
6. Adjustable Timer
Adjust the runtime of the device by tapping the timer button. The runtime alternates by
increments of one hour with every tap: 1H-2H-3H-4H-5H-6H-7H-8H, Loop in turn.
7. Replace the Filter
The Mini Air Purifier will count down when it is turned on or off. When the filter needs to
be replaced the filter icon indicator light will turn red. After replacing the new filter, keep
pressing the “filter” reset icon for 5 seconds.