Specifications

Helpline No. UK
/
North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 30113
37
TV settings
You will call up the Menu Picture of the analogue OSD Menu in this Menu, see
Page 43.
Common interface
You will have to register with a corresponding provider in advance if you wish to
view channels with a fee.
You will receive a Conditional Access Module (CAM Module) and a special card
from your provider after the registration. You will install these components in
your television device in the following way.
Switch the television device off and pull out the mains plug.
First, insert the CAM Module into the socket behind the connection cover on the
left of the television device (observed from the front). Then, insert the card.
The CAM Module must be inserted correctly the right way up; it cannot
be pushed in the wrong way up. The CAM Module or the television
device can be damaged if you attempt to push in the CAM Module with
force.
Connect the television device to the power supply, switch it on and wait for a
moment, until the card is recognized.
The following installation steps are necessary in addition in the case of some CAM
Modules. Please install the CAM Module by calling up the IDTV Menu initially,
then the Common Interface and then pressing the OK button. (The CAM
Installation Menu will only be displayed if necessary.)
You will display the relevant information in this way:
Call up IDTV; press the M button, then select Common Interface and press the OK
button.
‘No Common Interface Module recognized’ will be displayed on the screen if no
module has been inserted.
You will find detailed information about the settings in the documentation
supplied with the module.
Pay attention to the fact that you must only insert or remove the CI
Module if the device is in the STANDBY Mode or is SWITCHED OFF.