User`s manual

ManualsBrandsMedion ManualsFlat Panel TVFlat Panel TV

SETTING CHANNELS MANUALLY

1. Go to the channel slot in the program table that you would like to edit with the assis-

tance of the P+/P-/Vol+/Vol- Buttons.

2. Either press the YELLOW Button to call up the processing function directly or call up an

Edit Functions Menu with the MENU function and select EDIT.

3. Now the screen will display the PROGRAM EDIT or AV EDIT Menu:

4. Frequency entry:

Here, you can change the reception frequency or enter it directly. Position the Selection

Bar at FREQUENCY ENTRY with the P+/P- Buttons. Now, you will be able to change the

reception frequency with the VOL+/VOL- Buttons.

At the same time, attention should be paid that that the display bar of the 2nd TUNING

Menu Point is positioned in the center, because the station is set optimally then.

You can also enter the reception frequency directly with the number Buttons by pressing

the MENU Button. You will leave direct sound entry again with the MENU Button.

5. Channel grid:

The channel grid can be changed with the MENU Button (Menu) or the VOL+/VOL-

Buttons. The channel grid represents the setting of the channels to the frequencies

available and can vary according to the location (e. g. CCIR in Germany differs from the

setting necessary in France).

6. Channel type:

The channel type can be changed with the MENU Button (Menu) or the VOL+/VOL-

Buttons. It is possible to select between channels and special channels or special chan-

nels in individual states (e.g. C1 in France), depending on the setting of the channel

grid.

7. Channel number:

You can enter the channel number of the channel slot that you require directly here. You

can increase or decrease the current sound channel number with the VOL+/VOL- But-

tons. A cursor will appear and you will be able to enter the channel number directly with

the number Buttons when you press the MENU Button.

8. TV Standard:

The TV standard can be changed with the MENU Button (menu) or the VOL+/VOL-

Buttons. Settings related to the transmission norm (location-dependant) of a station can

be made here.

AV edit

1. Change name

2. Colour standard

3. Adjustment

Program edit

1. Frequency input

2. Tuning

3. Channel grid

4. Channel type

5. Channel number

6. Change name

7. TV-standard

8. Colour standard

9. Audio channel

10. Adjustment

11. Decoder