User`s manual

MANUAL ADDITION OF CHANNELS

1. Go to the first empty channel slot following the channel slots already stored in the pro-

gram table with the P+/P-/Vol+/Vol- Buttons. Press the MENU Button and select the

NEW TV signal source.

2. Now enter the channel type and subsequently the channel number or the relevant fre-

quency. Check the remaining settings for correctness in relation to the required sta-

tion(see chapter „Setting channels manually“from page 20).

3. Press the EXIT Button and confirm that you want to store the changes carried out with

YES.

ADD NEW CHANNELS AUTOMATICALLY

This function is very useful if the range of channels in your reception area (e.g. on the cable

network) is increased. An automatic station search, which will store all channels newly

added since the last station search, is started.

1. Press the MENU Button to reach the Main Menu.

2. Select the INSTALLATION Point with the P+/P- Buttons and press the MENU Button

again.

3. Select the SEARCH FOR NEW CHANNELS Menu Point with the P+/P- Buttons, press the

MENU Button and select START. The AUTOMATIC STATION SEARCH Menu will now ap-

pear on the screen:

4. This Menu serves to display the progress of the station search so far. You can cancel the

station search at any time with the MENU or the EXIT Button. No new stations will be

stored in this case.

5. You will reach the program table when the station search has finished, as following the

initial installation. New channels will have been added following the channels already

available. Please refer to chapter „Program table“ on Page 18, if you want to change the

sorting or the names.

Automatical Search

Frequency

Channel type

Last station

Found so far

Cancel

Installation

1. Select Location

2. Language

3. New installation

4. Search new programs

5. AV Settings

6. Switch on

7. Setting of all programs

8. Basic settings

9. Start logo

10. Service