User`s manual

CONNECTION

Your TV device offers you the possibility of connecting a PC or a source of video with VGA,

DVI or components output (a DVD player, for example). Your TV device can represent both

analog and digital input signals. Connect the DVI-I socket of the TV device to the video card

of your PC or to your source of video. Connect the line output of your PC or the audio output

of your source of video to the PC audio input (black jack socket next to the DVI-I input on

the back of the device), in order to transmit the sound signals at the TV device. You may

possibly have to use appropriate adapters or adapter cable for the connections.

Note: Please pay attention to the Instructions for Use of your PC and the sound and video

card or your source of video and the technical data of your TV device, in order to select the

necessary settings for the resolution and the refresh rate.

SETTINGS IN THE PC MODE

Press the PC Button to switch to the PC Mode. All pictures and sound in the PC Mode func-

tion precisely as in TV Mode.

Press the MENU Button to reach the Main Menu, select the PICTURE Menu Point and press

the MENU Button again. Move the Selection Bar to the PC SETTINGS Point with the P+/P-

Buttons and press the MENU Button again. You will reach the Menu for the PC SETTINGS:

1. Mode:

This Point shows whether there is a signal at the DVI-I input socket of the TV. It is not

possible to reach the settings for the picture presentation as long as NO SIGNAL is dis-

played (displayed in grey).

2. Change name:

It is possible to give a name to the PC setting. Press the MENU Button to reach the En-

try Mode (cursor appears). Now, you will be able to select the symbols with the P+/P-

Buttons and change the position with the den VOL+/VOL- Buttons. Leave the Entry

Mode by means of the MENU or the EXIT Button.

PC settings

1. Mode

2. Change name

3. Input

4. Horizontal position

5. Width

6. Vertical position

7. Phase

8. Frequency