Installation guide
Introduction
This Installation, Operation and Maintenance (O&M) manual includes descriptive literature, specifications and drawings relating
to the principal mechanical and electrical equipment incorporated in the unit. It is the responsibility of the installer and operator to
read and fully understand these instructions before installing, commissioning or operating the plant. In the unlikely event of prob-
lems occurring with your plant you may either refer to this manual, your equipment supplier or directly to EPS Bison.
The plant comprises two treatment stages; an aerobic biological zone and a final clarification zone. The design combines the
benefits of a well proven treatment process with our engineering expertise to produce a high quality system which is robust and
reliable. The plant will provide long and trouble free operation providing the simple maintenance procedures laid out in this manual
are regularly carried out.
Your attention is drawn to the ‘Health and Safety’ section at the beginning of this manual. It is IMPERATIVE that you read
these instructions BEFORE working on the plant.
The plant has been designed to treat the volume and strength of sewage specified in the original quotation. Please note the fol-
lowing points:
(see original quotation and order acknowledgement for details).
strong acids or alkalis, oil and grease, pesticides or photographic chemicals
must not enter the system.
If you have any doubt about a particular
substance, please contact EPS Bison.
3