User guide

2 Select Tools > Options. The following window is displayed.
3 Click to select the option button for the value you want:
- Glucose Units: mg/dL or mmol/L
- Carbohydrate Units: grams or Exchanges
a. If you selected Exchanges for Carbohydrate Units, type the appropriate number in the
grams are equal to 1 Exchange field.
4 Click to select or clear the check box in the Chart Options > Overview Report section. If the check
box is selected, the application will connect the BG readings on the Meter Glucose Overlay chart
with lines. (This is a chart that appears in the Sensor and Meter Overview Report.)
5 For the following Communications preferences, click to select the check box (enable), or to clear
the check box (disable):
NOTE: Make sure you follow the guidelines of your clinic or IT department when setting
communication preferences.
- Automatically check for software updates: if selected, a notification will be sent to each
system running CareLink Pro whenever a software update is available. The active user will
then have the opportunity to download and install the updates. To prevent this from
occurring and institute a controlled distribution of software updates, you can clear this
check box.
- Synchronize with Medtronic CareLink® Personal: If you want the system to automatically
synchronize your patients' CareLink Personal data each time you open their profile, select
this check box. If you clear this check box, you will have to manually synchronize the
CareLink Personal data for each patient.
CareLink Pro User Guide Getting started 14