User guide

Before you begin
Before you can open the Devices workspace for a patient, they must have a profile saved in the
system. See Chapter 4, Profile workspace.
To add a device or read data directly from it, the device must be communicating with the
computer. See Chapter 5, Hardware setup to learn how to set up devices to communicate with the
computer.
Adding a device
You can get data from the patient’s CareLink Personal account for a device not yet added. Such
devices will automatically be added when data is synchronized between CareLink Personal and
CareLink Pro.
NOTE: There can only be one active pump per patient. Adding a new pump will move the
existing one to the inactive list.
Adding a Medtronic pump or Guardian monitor
1 Make sure the device you are adding is set up to communicate with the computer. (See
Chapter 5, Hardware setup for connection steps.)
2 Click the patient’s tab or double-click their name on the Patient Lookup table.
3 Click Devices
to access the patient’s Devices workspace.
4 Click ADD DEVICE.
5 Select Medtronic Pump/Guardian. The Add Medtronic Pump/Guardian Wizard is displayed.
CareLink Pro User Guide Devices workspace 30