User guide

NOTE: The pump model is listed on the back of the pump or on the pump status screen.
6 Select the option button to specify the device you are adding.
If you selected the MiniMed 508 pump option, go to Step 9.
7 Click NEXT. The Serial Number page is displayed.
NOTE: An error message is displayed if you do not enter the correct serial number. Check
the examples on this page, and verify that you are entering the correct characters from
the back of the pump. If necessary, re-type the six characters.
8 Use the examples on this page to help locate the six-character serial number on the device you
are adding. (If you need more help in locating it, click >>learn more.) Type the six characters in
the Device Serial Number field.
9 Click NEXT. A Communication Options page similar to the following is displayed.
CareLink Pro User Guide Devices workspace 31