User guide

A message displays to let you know if the connection was successful. If it was, go to the next
step.
If not, make sure the hardware between the device and the computer is connected properly.
Also, click BACK on the wizard to make sure the data you have entered is correct.
13 Click DONE.
The meter is added to the patient’s Active Devices list.
Making a device active or inactive
Patient devices can be moved between the Active Devices list and the Inactive Devices list as
needed. A device must be active in order to read data from it.
You can have as many meters as you want on the Active Devices list, but only one pump. Make
sure you want to inactivate the current active pump before you add a new one.
Inactivating a device
1 Click the patient’s tab or double-click their name on the Patient Lookup table.
2 Click the Devices button to access the patient’s Devices workspace. Devices may be listed under
an equivalent device name. See Supported devices.
3 Click >> make this device inactive under the device you want to make inactive. The device
moves to the Inactive Devices list.
Re-activating a device
1 Click the patient’s tab or double-click their name on the Patient Lookup table.
2 Click the Devices button. The patient’s Devices workspace is displayed.
Devices may be listed under an equivalent device name. See Supported devices.
3 Click >> activate this device under the device you want to make active.
The device moves to the Active Devices list.
Deleting a device
These steps will delete a device and its data from the Devices workspace and the CareLink Pro
system:
1 Click the patient’s tab or double-click their name on the Patient Lookup table.
2 Click the Devices button to access the patient’s Devices workspace.
Devices may be listed under an equivalent device name. See Supported devices.
3 Make sure the device is on the Inactive Devices list. If it is not, click >> Inactivate this device
under its current listing.
CareLink Pro User Guide Devices workspace 35