User guide

Column heading Definition
Bolus Volume Selected (U)
The number of units of insulin selected to be delivered
during the bolus insulin delivery.
Bolus Volume Delivered (U)
The number of insulin units actually delivered during
the bolus insulin delivery.
Programmed Bolus Duration (h)
Duration of a square bolus or the square portion of a
dual wave bolus.
Prime Type
Manual or fixed. Manual is used just after a rewind, to
fill the infusion set tubing with insulin before inserting
it. Fixed is used after infusion set insertion to fill the
soft cannula with insulin after removing the introducer
needle.
Prime Volume Delivered (U)
The number of units of insulin actually delivered for
the prime
Alarm The name of the alarm that occurred.
Suspend Identifies the suspended state of the pump.
Rewind Date and time the device was rewound.
BWZ Estimate (U)
The bolus insulin estimate calculated by the Bolus
Wizard feature on the Paradigm pump.
BWZ Target High BG (mg/dL or mmol/L)
The setting for the high end of the blood glucose
target range, used by the Bolus Wizard feature.
BWZ Target Low BG (mg/dL or mmol/L)
The setting for the low end of the the blood glucose
target range, used by the Bolus Wizard feature.
BWZ Carb Ratio
The setting for insulin-to-carbohydrate ratio. If grams
are used as the units, the ratio is the number of grams
covered by one unit of insulin. If exchanges are used
for units, the ratio is the number of insulin units used
to cover one exchange.
BWZ Insulin Sensitivity
The setting for insulin sensitivity. Insulin sensitivity is
the amount the blood glucose level is reduced by one
unit of insulin. This is used by the Bolus Wizard
feature.
BWZ Carb Input
Amount of carbohydrates entered into the Bolus
Wizard and used to estimate a bolus.
BWZ BG Input (mg/dL or mmol/L)
Blood glucose reading when entered into the Bolus
Wizard and used to estimate a bolus.
BWZ Correction Estimate (U)
Units of bolus insulin to give for blood glucose level
correction, as calculated by the Bolus Wizard feature.
BWZ Food Estimate (U)
The estimated units of bolus insulin to give to cover
the expected amount of carbohydrate consumption, as
calculated through the Bolus Wizard feature.
BWZ Active Insulin (U)
The amount of active insulin calculated to be left in
the body from prior bolus insulin deliveries when
determining the estimated bolus amount through the
Bolus Wizard feature.
Sensor Calibration BG (mg/dL or mmol/L)
The BG value used for calibrating the sensor in mg/dL
or mmol/L).
CareLink Pro User Guide CSV data 57