- Mega System Technologies iCAMView Web Server User Manual For models: iCV-01a , iCV-01b, iCV-02, iCV-03

iCAMView user manual -1-

Chapter 1: Introduction

Section 1. Features

iCAMView is a compact stand-alone web-server capable of remote video

surveillance. It can be accessed from anywhere in the world via a standard browser

by entering the IP, account and password. Each system can simultaneously support

any two combinations of USB PC cameras be it regular, infrared or pan-tilt. With its

built-in web-server, iCAMView can stream video images directly to the Internet without

have to go through a computer. iCAMView features a Windows-based software that

allows the user to archive streaming video directly into the hard-drive. The same

software also allows the user to monitor multiple cameras on one screen.

Features:

• Built-in Web Server

• 10/100Mbps Fast Ethernet Network Access

• Support Any Java-Enabled Web Browser

• LCD display shows the IP address, Subnet Mask and Gateway

• 32-Bit RISC CPU

• 1MB Flash Memory

• 8MB Dynamic Memory

• Support Up to 30 Remote Viewers for each camera

• Allow Up to 8 User Accounts and Passwords

• 5.3VDC 1A Maximum

• Operating Temperature: 0°C ~ 60°C

• Operating Humidity: 10% ~ 90%

• Dimensions: 48mm x 63mm x 21m

• Weight: 75g

• For Indoor Use. Protective housing required for use

• Network Protocol: HTTP, TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS, DNS

Client, SNTP, BOOTP, DHCP, FTP, SNMP

• Support All USB PC Camera with VIMICRO ZC0301 Plus processor built-in

• Resolution: 640 x 480, 320 x 240, 160 x 120.

• Frame Rate: Up to 20fps in 320 x 240

• Motion JPEG streaming video

• 2 USB Ports for PC Cameras

• USB 1.1 & 2.0 compliant

• Can combine with two different PC cameras

• Support Pan/Tilt and Infrared USB PC Camera

Section 2. iCAMView as a Remote Surveillance System

Once iCAMView is installed, the user can check any of the connected PC cameras

using a standard web browser. The user can monitor and control these cameras

simply by entering the IP address of the iCAMView into a Web Browser from

anywhere in the world. For instance, the user can be in Australia but is able to