User manual

Water Distiller instructions for Polypropylene bottle and other accessories:

The PP bottle is placed inside the distiller body.

Please remove the accessories noted below to complete your setup.

Accessories in packed in the Styrofoam. Bottle located inside distiller body PP bottle components

The assembly of PP bottle:

1. Push the handle to the top of the bottle as shown in the images below. 2. Put the cover and lid on PP

bottle.

The assembly of the filter and nozzle:

Fold the activated charcoal

sachet in half and place it in the

nozzle.

There are 2 clip-on slots

underneath the water distiller

lid.

Insert the nozzle

into 2 clip-on slots.

Completed.

Removal of nozzle:

Gently squeeze both sides

of nozzle and pull it

down and towards to

you to remove.

During distillation, open the lid and align the

nozzle with the inlet of the bottle lid.

To pour water, remove the lid first.

Bottle, Cover, Handle, Lid

A - 6 activated charcoal

sachets in 1 box

B - 1 250gram cleaner

C - 1 power cord

D - 1 nozzle of PP bottle

and 1

PP Handle

and 1

PP Lid