User's Manual
This set-up is used for Hart Dynamics Studio
Master, Studio Master 5.3, Custom A, MegaPro
and Hart Pro 5.3 Drumsets.
With this configuration, the Ride and Bell triggers
on the ride cymbal are plugged in to 2 separate
inputs via the Y cable. This allows for maximum
control of the Ride and Bell triggering and sounds.
You can use any Ride sound in combination with
any Bell sound.
NOTE: You may also plug the TRS (stereo) cable from the ride cymbal in to the
ECSTAD ADAPTER, and then in to the RIDE Input. This set up uses only one input
and is useful if you wish to add other trigger devices (ECYMBAL, HAMMER, etc.).
If you use this set-up you MUST use an “X” Ride Sound (Rock Ride, Rock Bell,
“Rock X”). The “X” Ride sounds have both Ride and Bell sounds.
NOTE: Input 10 must be change from a Crash
sound to a Bell Sound.