Product specifications

530.PROD.GB.3 : 530.INST.INST.NONE.NONE.GB.1 Black,White 8

8©, MEI., 1994.

CashFlow



530 Changegiver Product Maintenance Handbook

It is important that before fitting the cassette back into place you

make sure the dispense arms are in their parked positions i.e they

are as far forward as possible. Switch the machine on, and press the

yellow mode key on the keypad twice. This will park the arms

automatically for you. (The dispense arms should protrude through

the bottom of the cassette after refitting).

REJECT LEVER CLEARANCE

2 There should be 2 to 3mm clearance between the reject lever on

the changegiver and the reject mechanism in the vending machine.

A smaller gap than this may cause poor acceptance, as the flight

deck lid may remain open.

CHUTE ALIGNMENT

3 The centre of the coin entry chute on the machine should be

aligned with the centre of the coin entry cup of the changegiver. The

alignment can be tested by taking the largest and smallest diameter

coins to be accepted and feeding a number through the product.

You should ensure that the coin exits, both return and cashbox, are

correctly aligned to the machine chuting. In particular, ensure there

are no gaps around the coin return chute and the base of the

changer which might allow coins to spill into the machine.

Press Here

Dispense Arms Should be Seen Here