Product specifications

530.PROD.GB.3 : 530.INST.CONFIG.KEYPAD.NONE.GB.1 Black 16
16©, MEI., 1994.
CashFlow

530 Changegiver Product Maintenance Handbook
Resetting the Tube Counts
You can force the tube counts to be set to their pre-programmed
float levels. This should be done if the coin storage cassette has
been manually filled to the preset float levels and then fitted to the
changer.
To avoid inadvertent resetting of the tube counts this function can
only be enabled if the changegiver is in the float mode.
1 Press the mode key.
2 Press key A followed by key B. The tube counts are now
reset to their pre-programmed float levels and the
changegiver exits the float mode.
Under no circumstances should the mode key and the A and B keys
be pressed if the low level sensor is uncovered.
Note: If the changegiver is not in the float mode before pressing the
reset key then the function will be ignored and the keypad will revert
to its normal mode.
Cancelling Credit
If you have been testing or resetting the changer outside of a shifted
mode you may accumulate credit in real money terms. To cancel
any credit, press the mode key once followed by the A key twice