Product specifications

530.PROD.GB.3 : 530.INST.CONFIG.CF_850.NONE.GB.2 Black,White 18
18©, MEI., 1994.
CashFlow

530 Changegiver Product Maintenance Handbook
KEY FUNCTIONS
Reset Key: used to reset all modes and to initialise any settings that
you have changed. If the reset key is pressed while an address is
being updated then the address may not be updated. The reset key
must be pressed to store the changes that you have made.
Up Key: used to increase the value displayed on the screen.
Down Key: used to decrease the value displayed on the screen.
Left Key: used to scroll the display to the left when a large number
is being accessed that cannot be fully displayed on the screen.
Right Key: used to scroll the display to the right when a large
number is being accessed that cannot be fully displayed on the
screen.
Enter Key: used to change between the address and data displays.
Other Facilities of the Terminal
The terminal has several features to speed up its use. This includes
the ability to scan at a higher speed with the keys auto repeating, to
automatically roll over from its highest to lowest address and to
inform the operator should a communication error occur.
Should you need to know which version numbers of the software is
used in the changegiver the UP key is pressed while the terminal is
in reset mode. The terminal will firstly display the acceptor HI
2
node
address, if the UP key is pressed again the acceptor software
version number will be displayed.. Pressing the UP key again will
display the acceptor eeprom number and if pressed again the
acceptor configuration code.
To return to normal operation press the RESET key.
DISPLAY
RESET

ENTER
UP
RIGHT
DOWN
LEFT