Product specifications

530.PROD.GB.3 : 530.INST.CONFIG.CF_850.NONE.GB.2 Black,White 19

©, MEI., 1994.19

CashFlow



530 Changegiver Product Maintenance Handbook

Auto Repeating Keys

If either the UP or DOWN keys are kept pressed they automatically

repeat. The repeat speed of the key increases the longer the key is

held down.

Double Click Hotkeying

If a key is doubled clicked (pressed twice in quick succession) then

this causes the address number to increment by a larger amount.

e.g. if the user starts at address number 1 then double clicks the UP

key, the address will jump to 40, double click again the address will

jump to address 100 etc. This is useful as the addresses used for

the changer start at address 200. You can also double click the

DOWN key to decrement by larger amounts.

USING THE TERMINAL

As soon as the terminal is connected to a changegiver it powers up

and interrogates the product.

The terminal display will clear and briefly show a message that

indicates the version of software in the terminal. A display of [0 1.0]

means software with a version number of 1.0 is fitted in the terminal.

After a few seconds the display will show the number [1.] or [1.-]. Not

all configuration items are applicable to every product but all the

address values are shown on the display. If the value for the

address is applicable to the product a dash will be present at the far

right position on the display. The value can then be accessed and

changed if required.

Power up message

Software version = 1.0

No dash displayed

Address is not accessible

for this product

Dash is displayed Address is

therefore accessible