Product specifications

530.PROD.GB.3 : 530.INST.CONFIG.CF_850.NONE.GB.2 Black,White 20

20©, MEI., 1994.

CashFlow



530 Changegiver Product Maintenance Handbook

The basic operation to alter the information held in an address is:

1 Connect the terminal to the CashFlow



product.

2 Wait for the terminal to power up correctly.

3 Select the address by using the UP and DOWN keys.

4 Examine the data by pressing the ENTER key.

5 Alter the data value by pressing the UP or DOWN keys

until the new value has been reached.

6 Press the ENTER key to return to displaying addresses.

7 Press the RESET key to initialise the new value.

When the terminal is displaying values stored at addresses, no

decimal point will be displayed.

If an error occurs with the communication between the terminal and

the changegiver the display will show an error message of four half

height zeroes.

This message will stay on the display. Pressing the RESET key may

clear the fault. The display will then revert to showing the current

address. If the error occurred while updating an address then the

value of that address should be checked as it may not have been

updated correctly. If, after pressing the RESET key, the fault

remains the error message will stay and you need to return the

terminal for repair.

As the screen is capable of only displaying four digits at any one

time the number displayed on the screen can be scrolled if it is

greater than 9999 by using the LEFT and RIGHT keys. The left or

rightmost digit will flash indicating an extra digit can be examined by

use of the scrolling keys e.g. Value is 12345

The table below shows you the address of each item that can be

reconfigured and their possible values.

Error message

press RIGHT key

press LEFT key

flashing

3 4 5