Product specifications

530.PROD.GB.3 : 530.GEN.MOD_XCHNG.STORE.NONE.GB.1 Black,White 33
©, MEI., 1994.33
CashFlow

530 Changegiver Product Maintenance Handbook
Removing the Designators
There are eight different size of designator. One designator is fitted
at the bottom of each tube in the cassette. They are colour coded
and identified by a letter on each one in the range A - H. The size of
designator fitted is determined by the thickness of the coin which is
to be routed to that tube. A list of the designators and coin
thicknesses are shown at the end of this section as well as a table
showing the possible designator and tube options. All designators
can be fitted in any position.
The designators are held in place by two clips which locate under
the base of the cassette.
1 Remove the tubes as described in the previous pages.
2 Lift the back of the designator and pull forwards out of
the cassette. You may find it easier to use a small
screwdriver to lift the designator clips.
Designators