Product specifications

530.PROD.GB.3 : 530.GEN.MOD_XCHNG.ACC.NONE.GB.1 Black,White 41

©, MEI., 1994.41

CashFlow



530 Changegiver Product Maintenance Handbook

REMOVING THE ACCEPTOR

1 Remove the coin storage cassette as shown in the

previous pages.

2 Unlatch the acceptor by pressing down on the blue

acceptor release catch with a small screwdriver.

3 Disconnect the acceptor loom which is plugged in to the

rear of the acceptor.

4 Ease the acceptor/separator module forwards and down

until it is free of the catch and rests on the locating pins.

5 Lift the separator out of the retaining slots on the spine.

REFITTING THE ACCEPTOR

1 Place the acceptor/separator in the retaining slots.

2 Plug in the acceptor loom.

3 Push the acceptor back to its upright position making

sure the acceptor loom is looped upwards. You will hear

the acceptor click into place against the release catch.

Acceptor

Release Catch

Acceptor

Loom