Product specifications

530.PROD.GB.3 : 530.GEN.MOD_XCHNG.ACC.NONE.GB.1 Black,White 44
44©, MEI., 1994.
CashFlow

530 Changegiver Product Maintenance Handbook
REMOVING THE ACCEPT GATE
1 Remove the acceptor/separator.
2 Detach the separator from the acceptor.
3 Remove the back cover, observing the earlier
instructions on removing the discriminator.
4 Dis-engage the PCB at the rear by releasing the
retaining clip on the upper left hand side of it. Extreme
care should be taken not to damage the flexi-circuit
leading to the PCB while it is dis-engaged.
The accept gate is held in the discriminator via three clips.
Release the clip at the point
shown in direction of arrow.
Gently ease accept gate
module outwards away
from discriminator.
Dis-engage the clip at the
base of the accept gate and
separate gently the two parts
in the direction of the arrow.
Pressing the side of the accept
gate at the point indicated, and
keeping the accept gate
parallel to the discriminator, pull
it free from its electrical
connections, taking care not to
bend the pins.
Rear view of discriminator
View under accept gate
View to right of accept gate