Product specifications

530.PROD.GB.3 : 530.GEN.MOD_XCHNG.ACC.NONE.GB.1 Black,White 45
©, MEI., 1994.45
CashFlow

530 Changegiver Product Maintenance Handbook
To replace the accept gate the discriminator lid must be opened.
Great care must be taken because the spring will become dis-
engaged if the lid, (which is normally restrained by the back cover),
is taken further back than 100˚.
When replacing the accept gate make sure that all three clips are
correctly aligned before pushing back into place. At all times the
flexi-circuit must be treated with care to ensure no damage results
from rough handling.
Should the spring require re-fitting the guides and pivot points
forming the physical link between the deck and lid must be first be
correctly located, and the spring connected at both ends. The two
parts should be pulled apart and pivoted into the correct position. At
no time should undue force be used as this will cause irreparable
damage to the mouldings and make the discriminator unusable.
Spring
Lid
Deck
PCB retaining
clip