Product specifications

530.PROD.GB.3 : 530.GEN.MOD_XCHNG.CONTROL_B.NONE.GB.1 Black 53
©, MEI., 1994.53
CashFlow

530 Changegiver Product Maintenance Handbook
REMOVING THE CONTROL BOARD
In order to remove the control board all other modules need to be
removed first. When removing those modules connected to the
control board via looms or cables, make a note of the positions of
the connectors that each module is attached to. This will help when
re-assembling.
When all modules have been removed you can access the control
board itself.
Turn the spine so that the rear is facing you. For safety reasons
there is a screw located to the right of the lower keyhole. Once
unscrewed, the back cover can be removed by releasing the three
clips as indicated by arrows on the back cover. The control board
can then be lifted off.
Screw
Back Cover
Release
Clips