Product specifications

530.PROD.GB.3 : 530.INST.FFIND.NONE.NONE.GB.1 Black 57

©, MEI., 1994.57

CashFlow



530 Changegiver Product Maintenance Handbook

Address 341 Disabled tube at position A, B, C or D

Range = 0 - 31

Range value = the sum of the codes, where:

1 / 2 / 4 / 8 = tube A / B / C / D

If necessary, use the Route Alpha 250 terminal to enable the tube.

Address 342 EEPROM Errors (i) READ ONLY

Range = 0 - 15

.Range value = the sum of the codes, where:

1 = Page 0 EEPROM error. Fatal error. Contact your MEI

distributor.

2 = Page 1 EEPROM error. Fatal error. Contact your MEI

distributor.

4 = Audit FEM corrupt. Fatal error. Contact your MEI distributor.

8 = Audit FEM removed. Switch off power to the machine. Check

that audit FEM is inserted ﬁrmly in the board. Contact your

MEI distributor if the error persists.

CAUTION. Switch off the power to the changegiver for

at least

2 minutes

before inserting or removing the audit FEM. Failure to do this can cause

corruption of the FEM and

loss of audit data.

Address 343 EEPROM Errors (ii) READ ONLY

Range = 0 - 15

Range value = the sum of the codes, where:

1 = Incorrect conﬁguration version. Contact your MEI distributor.

2 = Audit FEM not initialised. Initialise FEM, if ﬁtted. Refer to the

Product Maintenance Handbook before attempting to

initialise the FEM. Contact your MEI distributor if the error

persists.

4 = Not used.

8 = Internal EEPROM write error. Contact your MEI distributor.