Product specifications

530.PROD.GB.3 : 530.INST.FFIND.NONE.NONE.GB.1 Black 64
64©, MEI., 1994.
CashFlow

530 Changegiver Product Maintenance Handbook
Red LED is FLASHING
Fault with the changegiver unit. A coin has covered the top-level sensor mirrors. A coin is jammed in the dispenser module. Fault with the audit module. Coin cassette is unclipped.
Press A, B, C and D to check if coins are dispensed. If the red LED is still flashing, switch off the power to the machine, wait at least 15 seconds and switch on again.Check that coins are dispensed. Remove the coin cassette and check the tops of the coin tubes. Switch off the power to the machine, remove the cassette and check the dispenser for jams. Clear any blockages and check for damaged coins. Check the Route Alpha 250 audit addresses. Return the unit to your MEI distributor for repair if necessary. Press coin cassette into place firmly, ensure clips snap shut.
Red LED stays OFF and all coins are rejected
No stock available for vending. Check for fault on vending machine. No blocker signal from the machine. LED or keypad fault. Faulty transformer.
Restock machine if necessary. If an Executive version machine, check the communications cable. Refer to the Product Maintenance Handbook. Check for a full waste bucket. Check if machine is paused halfway through a vend cycle. Complete the cycle if necessary. Check the keypad module. If faulty, refer to your MEI distributor. Check the transformer. If faulty, refer to your MEI distributor.
Problem Causes Actions