Product specifications

530.PROD.GB.3 : 530.INST.FFIND.NONE.NONE.GB.1 Black 65
©, MEI., 1994.65
CashFlow

530 Changegiver Product Maintenance Handbook
Red LED permanently OFF. No other problems.
Faulty LED or keypad module.
Check the keypad module. If it is faulty, refer to your authorised MEI distributor.
Red LED is flashing
and
no coins are accepted
Check Route Alpha 250 addresses 340 to 349 for a description of the error. The lid of the acceptor is not closed firmly. The acceptor loom is not connected. The coin path in the acceptor is dirty.
Use the table of Route Alpha 250 error addresses in this manual. Switch off power to the machine and open and close the lid of the unit. Make sure the lid snaps shut firmly. Wait at least 15 seconds and switch the power on again. Check the acceptor loom and reconnect it if necessary. Switch off power to the machine and clean the acceptor.
Yellow LED is OFF
Normal operation No action
Yellow LED
flashes
when
coins are accepted
Normal operation No action
Problem Causes Actions