Product specifications

530.PROD.GB.3 : 560.GEN.CLEAN.ACC.NONE.GB.1 Black 67
©, MEI., 1994.67
CashFlow

530 Changegiver Product Maintenance Handbook
CLEANING THE ACCEPTOR
In order to ensure maximum efficiency from this product it is
essential to pay regular attention to the cleaning of the coin
pathway. Before attempting to clean or remove the Acceptor the
machine must be switched off. The shaded areas shown in the
diagram below should always be kept free from dirt, grease, etc. Any
cleaning should be carried out by using a soft damp cloth.The
surface should always be left clean and dry after any such cleaning.
Should any drops of water enter this product leave the machine
switched off until the water has dried out.
Never use solvents to clean this product as this will damage the
surfaces.
Note: Failure to switch the machine off before cleaning could result
in a possible delay in accepting coins.
The acceptor re-calibrates itself at power up and every 4 minutes
thereafter. If you switch on with the lid open it will re-calibrate itself
incorrectly and you will have to wait for 4 minutes after the lid has
been closed before it will start accepting coins.