MOTOROLA PIP10 DIGITAL AUDIO BABY MONITOR For: PIP10 User Guide
Safety instructions WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adaptors. Only use the AC Adaptors provided.
Baby monitor setup and use: • Determine a location for the baby unit that will allow you to hear your baby in his/her cot. • Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or mount the unit to a wall securely using the keyhole slots under the stand. • NEVER place the baby unit or cords within the cot.
Welcome... to your new Motorola PIP10 Audio Baby Monitor! • Secure, interference free reception and high-quality sound. • Long range up to 160 feet indoors and 1000 feet outdoors. • Microphone with high sensitivity. • Battery powered portable parent unit. • Expandable up to 2 parent units. • Parent unit with mute function and alert indicator. • Out of range and low battery alarm. Need help? If you have any problems setting up or using your PIP10, please visit us at motorolanursery.com/support.
This User Guide provides you with all the information you need to get the most from your digital audio baby monitor. Read the instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. Before you use the digital audio baby monitor, set up the parent and baby units. Follow the simple instructions in ‘Getting started’, on the next few pages. Important Only use the power adaptors supplied.
1. 2. 3. Getting started.................................................................... 8 Getting to know your baby monitor...........................11 Using the digital audio baby monitor........................13 3.1 3.2 3.3 3.4 3.5 4. 5. 6. 6 Turn the baby unit on / off............................................................................13 Turn the parent unit on / off.........................................................................13 Adjust the speaker volume on the parent unit.
< This page has been intentionally left blank > 7
1. Getting started Location Important Do not place your PIP10 in the bathroom or other humid areas. Place your units within reach of the AC power outlet and wall socket. The socket-outlet should be installed near the equipment and should be easily accessible. Range of parent and baby units Make sure the distance between the parent unit and baby unit is less than 300 metres. Setting up Important The baby unit must be plugged into the AC power at all times.
Connecting the baby unit 1. Plug the DC plug of the power adaptor into the DC jack on the rear of the baby unit and plug the other end of the AC adaptor into the AC power outlet. 2. Switch on the AC power. Installing batteries (not supplied) into the parent unit 1. Lift up the battery cover to remove it from the the parent unit.
2. Insert the battery cells (not supplied). Note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction. 3. Slide the battery cover back into place. Note You can either purchase non-rechargeble battery cells (2 x AAA batteries) or rechargeable NIMH battery cells (2 x AAA batteries) for the parent unit. Connecting the parent unit You will need to carry out this process for the single or dual parent units. 1.
2. Getting to know your baby monitor Overview of your baby unit Front view A Back view C D B A Microphone B Power button Press and hold to turn the baby unit on or off. C Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit.
Overview of your parent unit Front view Back view D E F A G H B C I A Microphone B Volume up Press to increase the speaker volume. C Power jack D Speaker E Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit. Flashes when the parent and baby units are not linked with each other. F Mute / Sound alert indicator (red LED) G Power button Press and hold to turn the parent unit on or off.
3. Using the digital audio baby monitor 3.1 Turn the baby unit on / off • Press and hold on the baby unit to turn it on. The power / linking LED indicator will turn on. • Press and hold on the baby unit again to turn it off. The power / linking LED indicator will turn off. 3.2 Turn the parent unit on / off • Press and hold on the parent unit to turn it on. The power / linking LED indicator will turn on. • Press and hold on the parent unit again to turn it off.
4. Help The power / linking LED Indicator on the parent unit does not turn on. • Check whether the parent unit is powered on. • Check whether the batteries are correctly installed and not drained. • Connecting the parent unit to the mains power to recharge it. The power / linking LED indicator on the parent unit flashes. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 300 metres. • The baby unit may be powered off.
5. Technical Specifications RF frequency bands 1881.792 MHz to 1897.344 MHz (Europe) RF transmission power < 0.25 W (EU version) Line of sight operating range between the baby and parent units 300 meters Power adaptor for the baby and parent units DC 6.0V, 0.4A with DC round plug from: 1921.536 MHz to 1928.448 MHz (USA & Canada) Dongguan Everest Industrial Co., Ltd. Address: No.2, Min Xing 1st Road, Shang Jiao, Chang An Town, Dong Guan, GuangDong, China.
6. General information Cleaning and care Important Always switch off and disconnect the power adaptor before cleaning your digital audio baby monitor. • Clean your digital audio baby monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the digital audio baby monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty.
What will MZGW do? MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts.
Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
FCC and IC regulations FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement: The baby unit complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with minimum distance 20cm between the radiator& your body. The parent unit has been tested and comply with FCC and ISEDC SAR limits. For face up operation, please hold the device 10mm from your face.
< This page has been intentionally left blank >
< This page has been intentionally left blank >
< This page has been intentionally left blank >
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved. Version 3.
