User's Guide

3. Using the digital audio baby monitor

3.1 Turn the baby unit on / o

• Press and hold on the baby unit to turn it on. The power / linking LED

indicator will turn on.

• Press and hold on the baby unit again to turn it o. The power / linking

LED indicator will turn o.

3.2 Turn the parent unit on / o

• Press and hold on the parent unit to turn it on. The power / linking LED

indicator will turn on.

• Press and hold on the parent unit again to turn it o. The power /

linking LED indicator will turn o.

Note

If you place the parent and baby units too close together, you may hear a high

pitched noise. This is not a fault. The units are designed to be operated at

some distance apart, e.g. in separate rooms, so move the units further apart.

If the power / linking LED indicator ﬂashes on the parent unit, they are not

linked to each other. Make sure that both units are powered on, and the

distance between the parent and baby units is less than 300 metres.

3.3 Adjust the speaker volume on the parent unit

Press or to increase or decrease the volume.

3.4 Mute the speaker

Press and hold to mute the speaker. The mute / sound alert indicator will

turn on.

3.5 Sound alert

The parent unit beeps when a loud sound is detected by the baby unit. The

mute / sound alert indicator will ﬂash. This feature is only available when the

speaker of the parent unit is muted.

Using the digital audio baby monitor