Operation Manual

30
• Make sure that the distance
between the remote control and the
appliance is within the range of the
signal.
• The remote control can be placed
in the storage space (4) at the top
of the appliance when not in use.
STORAGE
• Dismantle the base and store the
appliance in its original packaging
in a dry place when it is not in use.
Ensure that no dust can penetrate
the appliance, e.g. by wrapping it in
a plastic bag or similar.
• Do not place heavy objects on top
of the appliance.
• Always remove the batteries from
the remote control if the appliance
is not to be used for a prolonged
period.
• The cord must not be twisted or
wound around the appliance.
CLEANING
When cleaning the appliance, you
should pay attention to the following:
• Remove the plug from the mains
socket, and allow the appliance
to cool down completely before
cleaning it.
• Do not immerse the appliance in
water and make sure no water
enters the appliance.
• Clean the appliance by wiping it
with a damp cloth. A little detergent
can be added if the appliance is
heavily soiled.
• Do not use scouring pads, steel
wool or any form of strong solvents
or abrasive cleaning agents to
clean the appliance, as they can
damage the external surfaces of
the appliance.
• Alternatively, vacuum the appliance
on the outside. Never attempt to
open the appliance or insert items
into the appliance.
• IMPORTANT! Allow to dry
completely after cleaning. Do not
use the appliance if it is damp.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is tted with a BS 1363
13-amp plug. If you have to replace the
fuse, only those that are ASTA or BSI
approved to BS1362 and with a rated
current of 13 amps should be used. If
there is a fuse cover tted, this cover
must be retted after changing the fuse.
If the fuse cover is lost or damaged,
the plug must not be used. You must
also check if the socket outlets in your
home t with the plug of the appliance.
If the socket outlet in your home does
not t with the plug, the plug must be
removed and disposed of safely as
insertion of the plug into the socket is
likely to cause electric hazard.
As this product is a class II appliance,
the pin of BS plug for earth connection
is false.