Operation Manual

First steps

ENGLISH

Fig. 5: ON/OFF button

Requirement: The appliance has been installed and connected.

1. Place a vessel beneath the outlet.

2. Press the ON/OFF button.

» The welcome display appears on the appliance.

» The request to carry out the setup appears: Please set up the machine.

3. Conrm with "menu/ok".

» The Language menu appears.

4. Select your language with the arrow buttons. Conrm with "menu/ok".

» The Water hardness menu appears.

5. Select the determined water hardness range with the arrow buttons or

conrm the default value with "menu/ok".

» The request Please rell and insert water tank appears.

6. Remove the water tank. Rinse the water tank out with clean water. Fill

the water tank with fresh water and insert it.

» The appliance heats up and performs automatic rinsing.

» The ready symbol appears on the display.

7. Fill coee beans into the bean container. To do this, read section4.4

Filling coee beans into the bean container on page17.

» As required, a water lter can now be inserted (see section 9.9 Using a

water lter on page42).