Operation Manual
Permanently changing beverage settings
31
ENGLISH
7 Permanently changing beverage settings
The appliance oers further options for preparing coee specialities.
Default recipes can be used or the beverage settings can be permanently
changed.
7.1 Changing default settings
Depending on the beverage, the following default settings can be changed:
ū Coee amount: 25 ml to 220 ml
ū Milk amount or milk froth amount: 25 ml to 220 ml
ū Hot water amount: 25 ml to 220 ml
ū Coee strength: Very mild, mild, normal, strong, very strong
ū Temperature: Low, normal, high
Information
Changed default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
coee strength for an Espresso is described here as an example.
Direct keys
Espresso
Coffee strength
Strong
Confirm with OK:
Fig. 17: Setting the coee strength
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Coee strength menu.
3. Use the arrow buttons to select the desired coee strength and conrm
with "menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The newly selected coee strength is used the next time an Espresso is
prepared.