Operation Manual
8
The machine is ready to dispense beverages.
The display indicates that the machine is ready
for dispensing:
5. Dispensing beverages
5.1 Individual products
(Repeat selection/twin products with selec-
ted „twin function“, see 5.2)
쎲 Place cup on beverage shelf .
쎲 In the case of coffee jugs, fold up beverage
shelf and place jug on the drip grate.
쎲 Press briefly the key of the desired bever-
age , .
쎲 The chosen product is dispensed. This is
shown by the display.
쎲 When dispensing is completed, the display
once again indicates that the machine is
ready for dispensing the next product.
5.1.1 Hot-water outlet
쎲 The hot-water outlet, eg. for tea can be pre-
dosed or undosed. The set-up for this takes
place in the manager level (see 10, page
17-19).
쎲 If you have chosen undosed, hot water is
produced as long as the button is pushed.
The output quantity (0 - 1000 ml) must be
set up by your technical service.
쎲 A thermometer symbol in the display indi-
cates that the output temperature is too low.
Output stops until the pre-set temperature is
reached.
5.2 Repeat selection/twin products
This function is only available, if the „twin func-
tion“ is activated. It can be set by the technical
service engineer.
N.B.:
This setting is not suitable for self-service
operation.
For individual products, see 5.1
5.2.1 Repeat selection
쎲 If the same key is pressed a second time
while the beverage is already being pre-
pared, a further portion is stored and then
dispensed.
97
21
5
GB