MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 21 UNDERCABINET CD CLOCK RADIO MODEL: MMG-CR3810 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 1 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 2 INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 3 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 10. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 4 Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 5 POWER SOURCE Unravel the AC cord and connect it to a conveniently located AC outlet having 120V and 60Hz only. The Clock Display will blink. AC Outlet NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of AC Plug electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 6 LOCATION OF CONTROLS (CONTINUED) 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 7 MOUNTING This under the cabinet CD clock radio has been designed to be installed underneath a wooden cabinet by using the Mounting Template, four (4) Screws, four (4) Washers and four (4) Spacers (see Figure 1).
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 8 MOUNTING (CONTINUED) 3b. IF YOUR CABINET HAS AN OVERHANG: Measure the thickness of the overhang (see Figure 3). Fold the front of the template down along the printed guideline that is closest to the thickness of your cabinet. Tape the Measure Thickness folded portion to the of Cabinet Overhang backside of the overhang, Figure 3 then tape the template underneath the cabinet (see Figure 4).
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 9 MOUNTING (CONTINUED) 7. Insert screws from the INSIDE of the cabinet. The washers must be used on metal cabinets and wood cabinets if the drilled holes were not countersunk. Position the washers, flatside down, and insert the screws into the holes. 8. If your cabinet does not have an overhang, skip this step.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 10 OPERATION TO SET OR RESET THE ACTUAL TIME 1 2 1 2 When the unit is off, press the MEMORY/CLOCK SET button. 1 Press the SKIP/TUNING / buttons ❶ to set the hour, then press the MEMORY/CLOCK SET button ❷. Press the SKIP/TUNING / buttons ❶ to set the minutes, then press the MEMORY/CLOCK SET button ❷ again. TO SET THE COUNTDOWN TIMER 1 2 1 2 2 1 2 2 Press the TIMER button ❶ again and the minute digits will blink.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 11 OPERATION (CONTINUED) TO START THE COUNTDOWN TIMER 1 2 Once the countdown time has been entered (see previous page), press the TIMER button and the display will start counting down the preset countdown time. When the countdown timer reaches “00:00:oo”, the unit will beep. Press the TIMER button again to turn off the beeps. NOTES: • During the countdown, if you press the TIMER button again, the countdown timer will revert back to the original timer.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 12 OPERATION (CONTINUED) TO LISTEN TO THE RADIO 1 2 1 2 1 2 Press the POWER button ❶ to turn the unit on. Press the RADIO/BAND button once ❷ to select radio. Repeatedly press to select the desired band (AM, FM). 1 2 Tune a station by pressing the SKIP/TUNING or button ❶. To scan for strong station(s), press and hold the the SKIP/TUNING or button ❶; the unit will then scan and stop on the next strong station.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 13 OPERATION (CONTINUED) TO RECALL MEMORY PRESETS 1 MUTE 1 3 4 2 2 1 1 2 To recall the Memory Presets, simply press the MEMORY UP/REPEAT button ❶ or MEMORY DOWN/ RANDOM button ❷, or directly select them using the Number buttons ❸. For Memory Presets over 9, press the OVER button ❹ , followed by the Number buttons ❸ (i.e. to select 12, press the OVER button, followed by “1” then “2”).
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 14 OPERATION (CONTINUED) TO PLAY A CD 1 2 1 2 Insert a CD as described on the previous page. Press the POWER button ❶ to turn the unit on and press the CD button ❷. The total playing time and number of tracks will appear in the display. Press the PLAY/PAUSE ( ) button to start playback; the Play indicator will appear. TO PAUSE PLAYBACK, press the PLAY/PAUSE ( ) button again; the display will blink and the Pause indicator will appear.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 15 OPERATION (CONTINUED) DIRECT TRACK ACCESS 1 When a CD is playing, simply press the Number buttons ❶ to directly select a track. For tracks over 9, press the OVER button ❷, followed by the Number buttons ❶ (i.e. to select track 12, press the OVER button, followed by “1” then “2”. 1 2 TO REPEATEDLY PLAY BACK ONE TRACK 1 2 1 2 2 1 3 Press the POWER button ❶ to turn the unit on and press the CD button ❷.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 16 OPERATION (CONTINUED) TO RANDOMLY PLAY BACK TRACKS ON A CD 1 2 1 2 1 3 2 Press the POWER button ❶ to turn the unit on and press the CD button ❷. Press the MEMORY DOWN/RANDOM button ❸; “RANDOM” will appear in the display. 2 Press the PLAY/PAUSE ( ) button ❶ to begin playback. The unit will play all the tracks in random order. Adjust the volume using the VOLUME +/– buttons ❷ as desired. When all the tracks have been played, the unit will stop.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 17 OPERATION (CONTINUED) 3 4 2 1 1 Adjust the volume using the VOLUME +/– buttons ❶ as desired. When the disc is through playing, it will stop. Press the STOP (■) button ❷ to stop the disc before it is finished. Press the PLAY/PAUSE ( ) button to begin playback. The unit will play all the tracks in the order you programmed them. 5 NOTES: • Press the STOP ( ) button to stop the disc before it is finished.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 18 CARE AND MAINTENANCE Caring for Compact Discs • Treat the disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 19 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. CAUSE AC cord not connected. CD compartment not closed. Disc inserted incorrectly. Dirty or defective disc. Moisture condensation on disc. No sound. Volume is set to minimum. Defective disc. Erratic playback. Dirty or defective disc. Time display blinks. Clock not set. AM or FM, no sound.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 20 Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www.memcorpinc.