Datasheet

10
Magerdruck keine Lagerware · Bestellmenge und Preise auf Anfrage · Articles in roman typefaces not in stock · Order quantities and prices on request
SMD-Drucktaster SMD pushbuttons
1254 series SMD pushbuttons can
be combined with the entire MEN-
TOR pushbutton cap family to pro-
duce individual operator keypads.
These pushbutton caps are simply
push-fitted on to the pushbuttons
and can be arranged on printed
circuit boards as required.
The pushbutton measures 6.2x6.2
mm with a total height of 7.3
mm. The range includes pushbut-
tons with four different actua-
ting forces to allow customers to
choose a pushbutton tactile sensi-
tivity to suit the specific applica-
tion. Depending on the particular type of pushbutton, up to 1 million
switching cycles can be achieved. The pushbuttons are suitable for use
at temperatures between 25°C and +70 C.
The SMD pushbuttons are supplied in rolls of 700 for automated
assembly. The MENTOR range of pushbuttons can be soldered without
the use of lead in compliance with RoHS Directives.
Die SMD-Drucktaster der Serie
1254 lassen sich ideal mit der
gesamten MENTOR-Tastkappenfa-
milie kombinieren und zu indivi-
duellen Bedientastaturen zusam-
menfügen. Die Tastkappen werden
einfach auf die Taster aufgesteckt
und in beliebiger Form auf der Lei-
terkarte zusammengestellt.
Die Drucktaster haben einen Kor-
pus von 6,2mm x 6,2mm und eine
Höhe von insgesamt 7,3mm. Im
Programm sind Taster mit vier
verschiedenen Betätigungskräf-
ten, so dass der Kunde die taktile
Empfindlichkeit ganz individuell nach Art der Anwendung auswäh-
len kann. Je nach Variante des Drucktasters werden bis zu 1 Million
Schaltspiele erreicht. Einsetzbar sind die Drucktaster in Temperatur-
bereichen zwischen -25°C und +70°C.
Für die automatische Bestückung sind die SMD-Drucktaster auf Rolle
mit jeweils 700 Stück erhältlich. Das MENTOR-Tasterprogramm ist
selbstverständlich gemäß den RoHS-Richtlinien bleifrei lötbar.
Allgemeine Technische Daten (Auswahl bzw. Abweichungen zu den folgenden allgem. Daten: siehe Beschreibung des jeweiligen Artikels)
Lötwärmebeständigkeit DIN EN 61760-1 260°C 5s · Dampfphasenlöten nach Rücksprache · nach CECC 00802 / DIN 45802 - 260°C 10s
Lötbarkeit DIN IEC 68-2-20
UL-Listung auf Anfrage
Betriebstemperatur -25°C ... +70°C
Klima GPF DIN 40040
Gehäusewerkstoff Thermoplast
Verpackung Blistergurte nach DIN EN 60286-3
Spulen Standardkunststoffspulen primär Ø330mm
Anschlüsse verzinnt
General Technical Data (Selelection and deviations from the following general data: see description of the respective item)
Reistance to soldering heat DIN EN 61760-1 260°C 5s · Vapour-phase-soldering after consultation · to CECC 00802 / DIN 45802 - 260°C 10s
Solderability DIN IEC 68-2-20
UL listing Available on request
Operating temperature -25°C ... +70°C
Climate GPF DIN 40040
Housing material Glass fiber
Packaging Tape and reel packed to DIN EN 60286-3
Reel Standard plastic reel mainly Ø330mm
Terminals tinned