Assembly Instruction B A X1 X1 G F X1 D C C X1 X1 I H X1 E X1 X1 D A B E F G vibration massage H I X1
REMOTE CONTROL Function of remote Power on/off PRODUCT FEATURE 4Vibration Motors 5 Massaging modes Adjustable intensity Two massage zones, each zone can be operated individually The default timing is 15 min Massage intensity Massage modes selection Back/Lumbar Massage zone selection H HOW TO USE 1、 Insert adapter jack into the socket found on back of the massage cushion, then plug the adapter into a wall outlet(see Figure A) Figure A 2、 3、 4、 5、 6、 7、 Turn the unit ON by pressing the POW
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: 1、 This product is for use on a 12V circuit Make sure that the product is connected to an outlet having the same configuration as the plug. 2、 Always unplug the massager from the power source after use, and before cleaning. 3、 Do not reach for massager if it has fallen into water. Unplug immediately. 4、 An appliance should never be left unattended when plugged in.
MAINTENANCE INSTRUCTIONS TO STORE: Place unit in its box or safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric. Do not wrap power cord around the unit. Do not hang the unit by power cord. TO CLEAN: Insure the unit is unplugged from the power source, and allow to cool before cleaning. Do not place in any liquid to clean. Clean fabric cover by wiping with a damp sponge, using a mild detergent or suds. Pat dry with clean, dry cloth.
