Use and Care Manual

PRODUCT FEATURE
 4Vibration Motors
 5 Massaging modes
 Adjustable intensity
 Two massage zones, each zone
can be operated individually
 The default timing is 15 min
1、 Insert adapter jack into the socket found on back of the massage cushion,
then plug the adapter into a wall outlet(see Figure A)
Figure A
2、 Turn the unit ON by pressing the POWER button once, The LED will
illuminate when power is on.
3、 Turn on the massage in each zone by pressing the BACK, LUMBAR, buttons.
LEDs will illuminate when each zone is activated. To turn off a zone, press
the button again.
4、 To choose a desired massage mode, press the MODE button. To change
modes, press MODE button until LED for desired mode illuminates
PULSE---for deep tapping massage
PRESS---provides rapid tapping massage
WAVE----for a gradual, side-to-side vibrating massage
AUTO---provides a random pulsing massage to all zones
NORMAL---for a firm, vibrating massage
5、 To change the massage intensity press the INTENSITY button. The LED for
HIGH or LOW intensities will illuminate when chosen.
NOTE：Discontinue use immediately if you feel any discomfort or pain.
6、 NOTE: for your benefit, the massage mat is equipped with an auto shut-off
feature that will turn the cushion unit off after 15 minutes of continuous
use.
7、 DO NOT use for more than 30 minutes of continuous use.
REMOTE CONTROL
Function of remote
HOW TO USE
Power on/off
Massage intensity
Massage modes selection
Back/Lumbar
Massage zone selection
H