Owners Manual

On-board computer without steering
wheel buttons
X
Turn the key to position 2 in the ignition
lock.
X
Press the y switch.
The y symbol in the display flashes.
or
X
Press the 4 menu button on the
instrument cluster repeatedly until the
y symbol flashes in the display.
X
Use the f or g buttons on the instrument
cluster to select switch-on time 1 to 3.
The switch-on time selected is displayed.
X
Wait 10 seconds for the standard display to
appear.
The switch-on time is selected. The yellow
indicator lamp in the y switch comes
on.
If you have not preselected a switch-on time
and --:-- is shown in the display, this means
that automatic switch-on mode is
deactivated. The yellow indicator lamp in the
y switch goes out.
i
If you turn the key to position 0 in the
ignition lock, the yellow indicator lamp in
the y switch goes out after
30 minutes.
The red indicator lamp in the y switch
comes on when the auxiliary heating
switches on.
On-board computer with steering wheel
buttons
X
Turn the key to position 2 in the ignition
lock.
X
Press the y switch.
The Aux. heat. submenu is shown in the
display.
If no switch-on time has been preselected,
the selection marker highlights the
preselected switch-on time, or Timer off.
i
You can also access the Aux. heat.
submenu via the Settings(Y page 82)
menu.
X
Use the W or X buttons on the
steering wheel to select the desired switch-
on time.
Use the Timer off setting to deactivate
automatic switch on.
X
Press the V button on the steering
wheel.
The switch-on time is selected. The yellow
indicator lamp in the y switch comes
on.
i
If you turn the key to position 0 in the
ignition lock, the yellow indicator lamp in
the y switch goes out after
30 minutes.
The red indicator lamp in the y switch
comes on when the auxiliary heating
switches on.
Setting the switch-on time
On-board computer without steering
wheel buttons
X
Use the same method to select a switch-on
time as described in the "Preselecting a
switch-on time" section.
X
Press the 9 reset button on the
instrument cluster.
The hour display flashes.
X
Use the f and g buttons on the
instrument cluster to set the hours.
X
Press the 9 reset button.
The minute display flashes.
X
Use the f and g buttons to set the
minutes.
108
Climate control
Controls