Owners Manual

Using the monitor
Monitor buttons
:
: Down button
;
9 Up button
=
t Menu/Confirm button
?
u Monitor on/off switch
A
Speaker cover
Switching on the monitor
You can switch on the monitor by:
R
engaging reverse gear R
The rear view camera is activated. This then
switches the monitor on.
R
pressing the u button
The input for auxiliary equipment (AUX) on
the monitor is activated.
i
If you have switched the monitor off using
the u button, you must press the
u button after engaging reverse gear
R. Only then is the monitor switched on.
Input for auxiliary equipment (AUX)
If you engage reverse gear R while using
auxiliary equipment, the monitor switches to
the rear view camera.
When you disengage reverse gear R, the
monitor continues to show the picture from
the rear view camera for around 15 seconds.
The monitor then switches back to the signal
from the auxiliary equipment (AUX).
Switching off the monitor
If the monitor is switched on by engaging
reverse gear R, it switches off automatically
15 seconds after you disengage reverse gear
R.
You can switch off the monitor by pressing
the u button. In this case, the following
message is shown for 7 seconds before it
switches off.
Menu system
Setting the volume
X
Briefly press the : or 9 button.
The volume of the integrated loudspeaker
is adjusted in increments.
i
The volume of the optional infrared
headphones is adjusted on the
headphones themselves.
X
Press the t button to exit the volume
adjustment.
i
If you do not press a button for
7 seconds, the monitor switches off the
volume adjustment.
Selecting the main menu
X
Press the t button.
The menu selection for the main menu
(menu level 1) is displayed.
Driving systems
125
Controls
Z