Owners Manual

5 minutes, repeat the engine oil level check
after a further 5 minutes.
If an oil level reading is still not displayed,
check the engine oil level with the oil
dipstick.
Have the oil level display checked at a
qualified specialist workshop.
Vehicles without steering wheel buttons
X
Press the 4 menu button on the
instrument cluster repeatedly until the
display shows the 1 symbol.
The --:-- display flashes while the oil level
is being measured.
The following messages may be displayed:
1
OK
X
Do not add oil.
– 1.0 qts
X
Add the amount of oil
shown (Y page 176).
X
Check the engine oil
level again after a few
minutes.
– 1.5 qts
– 2.0 qts
HI
X
Have excess oil
removed. The oil level is
too high.
Measurement units in the display:
R
qts USA only
R
lt. Canada only
Vehicles with steering wheel buttons
X
Press the Ë button on the instrument
cluster (Y page 73).
The following message is displayed for the
duration of the measurement process:
4Engine oil level Measuring in
progress
The following messages may be displayed:
1
Engine oil
level OK
X
Do not add oil.
Engine oil
Add 1.0
quart
X
Add the amount of oil
shown (Y page 176).
X
Check the engine oil
level again after a few
minutes.
Engine oil
Add 1.5
quarts
Engine oil
Add 2.0
quarts
Engine oil
level
Reduce oil
level
X
Have excess oil
removed. The oil level is
too high.
Eng. oil
lev. Turn
ignition
on for
level
X
Turn the key to position
2 in the ignition lock.
Observe
wait.
period
X
If the engine is at regular
operating temperature,
carry out a new
measurement after
approximately
5 minutes.
X
If the engine is not at
regular operating
temperature, carry out a
new measurement after
approximately
30 minutes.
Engine oil
level Not
when eng.
running
X
When the engine is at
regular operating
temperature, switch off
the engine and wait
5 minutes for the
measurement.
Measurement units in the display:
R
quart(s) USA only
R
liter(s) Canada only
Maintenance
175
Operation
Z