Owners Manual

Tire sealant bottle for single tires
C
Valve
D
Tire sealant bottle with hook, hose and
valve core extractor
Tire sealant bottle for twin tires
C
Valve
D
Tire sealant bottle with hook, hose and
angled connecting piece
X
Shake tire sealant bottle D.
X
Unscrew and remove the cap from valve
C of tire sealant bottle D.
X
Push angled connecting piece ; located
on hose = of the tire inflation compressor
as far as it will go onto valve C of tire
sealant bottle D and fix in place.
The following steps differ depending on the
vehicle tires.
R
Single tire (Y page 226)
R
Twin tires, inner wheels (Y page 227)
R
Twin tires, outer wheels (Y page 228)
Single tire
E
Hook
F
Button
G
Lever
H
Valve core extractor
I
Tire valve
X
Pull knob F out of valve core extractor
H as far as it will go.
X
Remove the cap from valve I on the
defective tire.
X
Hook tire sealant bottle D into the upper
vent hole in the wheel using hook E.
X
Keep pressing lever G, place valve core
extractor H firmly onto tire valve I and
then release lever G.
X
Press knob F into the valve core of valve
I, turning it gently as you do so, until the
shaft of valve core extractor H engages.
X
Turn knob F counter-clockwise until the
valve core is unscrewed.
X
Pull knob F out of valve core extractor
H as far as it will go.
This pulls the valve core into the valve core
extractor and seals it against the valve core
extractor stop.
X
Make sure that the pressure release screw
on pressure gauge A is closed.
X
Connect connector B to the 12 V socket
(12 V, 25 A, 300 W) on the center console
(Y page 134).
!
Only use the 12 V socket on the center
console to connect the electric air pump.
226
Flat tire
Practical advice