Owners Manual

You could otherwise damage the vehicle's
electrics.
X
Start the engine.
X
Press I on tire inflation compressor
switch :.
The tire inflation compressor is activated.
The tire sealant is then pumped into the tire
and the tire pressure is increased. Run the
tire inflation compressor for at least
10 minutes until tire sealant bottle D is
completely empty and a minimum tire
pressure of 43.5 psi (3.0 bar) has been
reached.
!
Do not run the electric air pump for longer
than 20 minutes without a break; otherwise
it may overheat.
The air pump can be used again once it has
cooled down.
X
Inflate the tire using the tire inflation
compressor until the recommended tire
pressure (Y page 288) is reached.
X
Then, press 0 on tire inflation compressor
switch :.
The tire inflation compressor is
deactivated.
X
Slide knob F quickly to the stop in valve
core extractor H.
X
Turn knob F clockwise until the valve core
is firmly screwed into tire valve I.
i
Do not pull the valve core extractor off the
tire valve while the valve core is unscrewed
from the tire valve. The tire sealant could
otherwise run out and get on your skin or
clothes.
The tire sealant is water-soluble. If tire
sealant escapes, you can wash it off with
water.
X
Press lever G and pull valve core extractor
H from tire valve I.
X
Screw the valve cap onto tire valve I.
After filling with tire sealant, (Y page 230).
Twin tires, inner wheels
E
Valve extension
F
Valve core extractor
X
Unscrew the valve cap from valve
extension E of the defective tire.
X
Screw valve core extractor F clockwise as
far as it will go onto valve extension E.
X
Screw valve core extractor F
approximately a further half turn to release
the valve extension.
X
Unscrew the valve extension and the valve
core extractor counter-clockwise from the
tire valve.
X
Unscrew the valve extension from the valve
core extractor.
F
Valve core extractor
G
Hook
H
Button
I
Angled connecting piece
J
Tire valve
Flat tire
227
Practical advice
Z