Owners Manual

High-beam headlamps/cornering lamps,
low-beam headlamps
X
Switch off the lights.
X
Open the hood (Y page 171).
X
Press catches : down.
X
Lift housing cover ; in the direction of the
arrow and remove it.
=
Low-beam headlamps
?
Halogen low-beam headlamp/Xenon
cornering lamp headlamp
X
Disconnect the connector from the bulb.
X
Detach the retainer spring and remove the
bulb.
X
Insert the new bulb so the base fits into the
recess of the socket.
X
Attach the retainer spring and connect the
plug to the bulb.
X
Insert housing cover ; into the lower
mounting points.
X
Fold housing cover ; against the
headlamp casing.
X
Push catches : up until you feel them
engage.
Turn signal lamps
X
Switch off the lights.
X
Open the hood (Y page 171).
X
Turn bulb holder : counterclockwise and
remove it.
X
Turn the bulb counterclockwise by pressing
lightly and pull it out of bulb holder :.
X
Press a new bulb into bulb holder : and
screw in clockwise.
X
Insert bulb holder : into the lamp and turn
it clockwise.
Parking lamps and standing lamps
X
Switch off the lights.
X
Open the hood (Y page 171).
X
Turn cap : counterclockwise and remove
it.
X
Pull out the bulb holder with the bulb.
Electrical system
237
Practical advice
Z