Owners Manual

X
Switch off the lights.
X
Undo screws : and remove the rear lamp
lens in the direction of the arrow.
X
Pull the connector off the bulb holder.
;
Retaining lugs
=
Brake lamps
?
Standing lamp/tail lamp
A
Backup lamps
B
Turn signal lamps
C
Rear fog lamp
X
Release retaining lugs ; and take the bulb
holder out of the rear lamp cluster.
X
Turn the bulb counterclockwise by pressing
lightly and pull it out of the bulb holder.
X
Press a new bulb into the bulb holder and
screw in clockwise.
X
Press the connector into the bulb holder.
X
Insert the lamp lens.
To do this, clip the bulb holder into the three
holes provided at the side and tighten
screws :.
License plate lamp
X
Switch off the lights.
X
Insert a screwdriver or similar implement
into recess ; and carefully pry off lamp
lens :.
X
Pull the bulb out of the bulb holder.
X
Insert a new bulb.
X
Align lamp lens : and clip it in so that it
engages.
Changing the rear bulbs (chassis)
:
Screws
;
Lamp lens
=
Perimeter lamp/standing lamp
?
Turn signal lamps
A
Brake lamps
B
Tail lamps
C
Rear fog lamp
D
License plate lamp
E
Backup lamps
X
Switch off the lights.
X
Undo screws : and remove lamp lens ;.
Electrical system
239
Practical advice
Z